Industrial Vibrator EB and EB-X Models Three Phases
Industrial Vibrator EB and EB-X Models Three Phases
The EB and EB-X (ATEX) series of unbalanced electric vibrators is a complete range of three-phase bolt-on industrial vibrators.
Highlights :
- Electric motor designed with low-loss silicon magnetic steel air gaps, for enhanced performance and reduced heat build-up
- Continuous operation at maximum centrifugal force
- Adjustable centrifugal weights to vary centrifugal force from 30 to 100%.
| Applications | Compaction, Conveying, Draining, Flow, Screening, Sieving, Sorting, Unclogging |
|---|---|
| Sector | |
| Energy | Electric |
- Standard three-phase power supply 400 V at 50Hz
- Insulation class F
- Mechanical protection: IP65-7
- Class H resin-impregnated motor (ASTM method)
- Improved NiCrMo steel motor shaft
- Oversized bearings, lubricated with special “LONG-LIFE” grease KLUBER STABURAGS NBU 8 EP
- Thermistor motor protection (PTC) on large vibrators > 5.5 KW
- Supplied unwired and boltless
The EB and EB-X range is extensive, offering speeds from 750 rpm to 3,000 rpm, with centrifugal forces of up to 200 kN for the most powerful model in the series.
The vibrations they generate are suitable for a wide range of sectors: chemicals, quarrying, plastics, energy, civil engineering, recycling, food processing…
Contact us directly for the following requirements:
Insulation class H – Stainless steel feeder side covers – Special center distances – Special voltages and frequencies – Addition of heating resistors.
EB series vibrators can be used with a frequency converter, which we can supply on request!
We also offer EA and EA-X series three-phase industrial vibrators series for applications requiring a higher level of centrifugal force.
Single-phase power supply only? Our EAM series single-phase industrial vibrator may be of interest to you!
| ATEX certificate | CE certificate |
The entire EB range is manufactured in compliance with IEC 60034-1 and EEC directives:
- 2006/42/ EC Machinery Directive
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
- RoHS 2011/65/EU
EB series industrial vibrators are also available in the following versions on request:
- EB-X ATEX according to ATEX Directive 2014/34/EU, execution II 3D Ex tc IIIC T…..°C Dc, for Dust Zone 22 and II 3G Ex nAc II T3/T4 Gc, for Gas Zone 2
- CSA, certified and compliant with CSA-C22.2 No. 100-14 and UL 1004-1 (2nd ed.) standards
- Standard three-phase power supply 400 V at 50Hz
- Insulation class F
- Mechanical protection: IP65-7
- Class H resin-impregnated motor (ASTM method)
- Improved NiCrMo steel motor shaft
- Oversized bearings, lubricated with special “LONG-LIFE” grease KLUBER STABURAGS NBU 8 EP
- Thermistor motor protection (PTC) on large vibrators > 5.5 KW
- Supplied unwired and boltless
The EB and EB-X range is extensive, offering speeds from 750 rpm to 3,000 rpm, with centrifugal forces of up to 200 kN for the most powerful model in the series.
The vibrations they generate are suitable for a wide range of sectors: chemicals, quarrying, plastics, energy, civil engineering, recycling, food processing…
Contact us directly for the following requirements:
Insulation class H – Stainless steel feeder side covers – Special center distances – Special voltages and frequencies – Addition of heating resistors.
EB series vibrators can be used with a frequency converter, which we can supply on request!
We also offer EA and EA-X series three-phase industrial vibrators series for applications requiring a higher level of centrifugal force.
Single-phase power supply only? Our EAM series single-phase industrial vibrator may be of interest to you!
The entire EB range is manufactured in compliance with IEC 60034-1 and EEC directives:
- 2006/42/ EC Machinery Directive
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
- RoHS 2011/65/EU
EB series industrial vibrators are also available in the following versions on request:
- EB-X ATEX according to ATEX Directive 2014/34/EU, execution II 3D Ex tc IIIC T…..°C Dc, for Dust Zone 22 and II 3G Ex nAc II T3/T4 Gc, for Gas Zone 2
- CSA, certified and compliant with CSA-C22.2 No. 100-14 and UL 1004-1 (2nd ed.) standards
Related products
EA and EA-X series three-phase industrial vibrators
Single-phase Industrial Vibrators EAM Series
DC Industrial Vibrators EACC Series
Need help?
Call us on 04 78 83 31 31!